Dear It experts
Please solve my problem.
I am facing a problem with my hard disc 2, its working but not showing in the system explorer or any where.
Dear It experts
Please solve my problem.
I am facing a problem with my hard disc 2, its working but not showing in the system explorer or any where.
hdd ki data cable change kr k dekehin...
Assalam O Alikum,
You need to test it with drive-maker's testing software (if it can detect the disk).
Install Hitachi OGT Diagnostic Tool for Windows from here:
Downloads
If that cannot test the external drive, try using Seagate Seatools for Windows instead, from here: SeaTools for Windows | Seagate
If the drive cannot be detected by any testing software then it is definitely very damaged. Getting any data off it will involve paying a lot of money to a data-recovery company. That's why it is so important not to keep your files on just one disk!
A hard drive can fail at any time, even if it is never dropped!
.................................................. .................
a) Have you made any recent changes on the computer before the issue occurred?
Method 1
Check if both the hard drives have drive letter assigned using Disk management.
a) Open Computer Management by clicking the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
If both the drives does not have an drive letter then try to assign letters and check if it works.
To change, add, or remove a drive letter
a) Open Computer Management by clicking the Start button, clicking Control Panel, clicking System and Security, clicking Administrative Tools, and then double-clicking Computer Management. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
b) In the left pane, click Disk Management.
c) Right-click the drive that you want to change, and then click Change Drive Letter and Paths.
d) Do one of the following:
i. To assign a drive letter if one has not already been assigned, click Add, click the letter that you want to use, and then click OK.
ii. To change a drive letter, click Change, click Assign the following drive letter, click the letter that you want to use, and then click OK.
iii. To remove a drive letter, click Remove and then click Yes to confirm that you want to remove it.
Method 2
If the above step fails then you will need to modify the registry and check.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry refer the below link.
Back up the registry
http://windows.microsoft.com/en-US/w...p-the-registry
a) Click the Start Button, type "regedit" (without quotation marks) in the Start Search box and then press ENTER.
b) Navigate to the following key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{36FC9E60-C465-11CF-8056-444553540000}
c) Right click the {36FC9E60-C465-11CF-8056-444553540000}entry, choose "Export", select Desktop in the Save in box and type backup in File Name. Click Save.
d) Please Note: The backup file is on the Desktop and named backup.reg. We can simply restore the registry by double-clicking the backup.reg file.
e) Highlight this key {36FC9E60-C465-11CF-8056-444553540000}, on the right pane, and then check if Upperfilters and Lowerfilters value are present. If so, please right click on the values and select "Delete" to remove them.
f) Restart the computer
Hope this helps!
Aap k pass konsi HDD hein Sata ya IDE?
Yeh try ker lein step by step
1) Check in Computer Management.
2) Agar IDE hein tu jumper setting check kerein (One Master at a time and remaining Slave)
3) Agar SATA hein, tu BIOS mein Sata ki setting verify kerein.
4) HDD ki cables change ker k dekhein
5) Use USB to IDE/Sata converter and plug-in into system
قابل احترام دوست... اگر آپ کو آپکی دوسری ہارڈڈسک شو نہیں ہورہی تو آپ اس طرح کریں کے اپنی پہلی والی
ہارڈڈسک ان پلگ کردیں اور پھر وہی کیبل اس ہارڈ ڈسک کو لگا کردیکھیں.. اگر تو شو ہوگئی تو سمجھیں کے
آپ کی ڈیٹا کیبل خراب ہے.. اور آپ پاور کنیکٹر بھی تبدیل کرکے دیکھیں.. اُمید ہے آپ مسلہ حل ہوجائے گا..شکریہ
All Dear`s
My hard disc is appearing in bios, in device manager,
but not showing in disk management and explorer
My hard disc is going to stuck during running its real size is 40gb now its showing 2tb and unallocated.
hdd regenerator use krein....
Ap screen short karke paste kare
BestRegards
lMicrosoft Certified IT Professional l System Engineerl Hardware,Virtualization,Wirelessl
Bookmarks