kisi ka bi computer off karay

[rashid832]

dosto may nay kuch din pehlay it dunya par threed parhi thi k kisi ka bhi computer off kar with ip adress say yani us computer ka ip adress pata hona chaye jis say hum us ka computer off kar saktay hy plz mujhay koi ye threed dhoond day ya tariqa bata day

[rashid832]

help me

[owais1987]

1.
Open the command prompt. This may be done by clicking on the "Start" button, and selecting "Run".

2.
Type in cmd and press Enter.

3.
Type in shutdown -m \\computername, replacing "computername" with the name of the computer you wish to shutdown or the computer's IP address.

4.
Experiment with the shutdown command's switches.

-r will force a restart, disabling any services or user interaction from interrupting it.
-c "comment" will force a comment to appear on the system being shutdown.
-t xx will force a timeout for "xx" seconds. For example, -t 60 would perform a shutdown after a 60-second timeout.
-a will abort the shutdown.
A full command example: shutdown -m \\myserver -r -c "This system will shutdown in 60 seconds" -t 60
5.
Try another method:

Type shutdown -i in the run window.
Click the "Add" box and type the name of the computer you want to shutdown or its IP address. You can select what you want the computer to do.
In this mode, it's necessary to add a comment. Do so.
Press OK.

Tips !!!!

For a complete list of the switches (options) for the "shutdown" command, type in shutdown ? inside of a command prompt window.
This will only work on Microsoft Windows-based systems. Linux and Mac will require different terminal commands.
You may also run this shutdown command directly from the "Run" dialog. Opening a command prompt is merely a convenience in case you happen to type in the wrong system name or need to search for the name of the system to shutdown.
The target computer and your PC need to be in the same Domain or Workgroup for this to function correctly.


Warnings !!!!
T departments typically block access to using this command on a remote computer. Even if they do not hinder your ability to do this, performing this may be grounds for disciplinary action, a write-up at work, or worse, depending upon your IT department's policies.
Perform this only on your own network or where you are authorized to do this.

[rashid832]

is say sirf apna computer off hota hy kisi ka nai hota hy jab ip adress lagata ho to likha ata hy ip adress is not valid jab may apnay computer ka naam likhta ho to mera system band ho jata hy plz help me

[rashid832]

is say sirf apna computer off hota hy kisi ka nai hota hy jab ip adress lagata ho to likha ata hy ip adress is not valid jab may apnay computer ka naam likhta ho to mera system band ho jata hy plz help me
koi to help karay

[rashid832]

[FONT=""][COLOR=""][SIZE=""]

1.
Open the command prompt. This may be done by clicking on the "Start" button, and selecting "Run".

2.
Type in cmd and press Enter.

3.
Type in shutdown -m \\computername, replacing "computername" with the name of the computer you wish to shutdown or the computer's IP address.

4.
Experiment with the shutdown command's switches.

-r will force a restart, disabling any services or user interaction from interrupting it.
-c "comment" will force a comment to appear on the system being shutdown.
-t xx will force a timeout for "xx" seconds. For example, -t 60 would perform a shutdown after a 60-second timeout.
-a will abort the shutdown.
A full command example: shutdown -m \\myserver -r -c "This system will shutdown in 60 seconds" -t 60
5.
Try another method:

Type shutdown -i in the run window.
Click the "Add" box and type the name of the computer you want to shutdown or its IP address. You can select what you want the computer to do.
In this mode, it's necessary to add a comment. Do so.
Press OK.

Tips !!!!

For a complete list of the switches (options) for the "shutdown" command, type in shutdown ? inside of a command prompt window.
This will only work on Microsoft Windows-based systems. Linux and Mac will require different terminal commands.
You may also run this shutdown command directly from the "Run" dialog. Opening a command prompt is merely a convenience in case you happen to type in the wrong system name or need to search for the name of the system to shutdown.
The target computer and your PC need to be in the same Domain or Workgroup for this to function correctly.


Warnings !!!!
T departments typically block access to using this command on a remote computer. Even if they do not hinder your ability to do this, performing this may be grounds for disciplinary action, a write-up at work, or worse, depending upon your IT department's policies.
Perform this only on your own network or where you are authorized to do this.

nai band ho raha hy is say sirf mera hi computer off ho jata hy plz help me[/SIZE][/COLOR][/FONT]

[owais1987]

Intro
Follow these steps to turn your computer on and off remotely.

Tested: 100% reliable on Windows ®XP Professional
With the Shutdown command
Prerequisites
For this method, you must share the same local area network (LAN) as the target computer. You also need to know the user name and password of the target computer.
Port 445
Find out if TCP port 445 is open in the target computer's Windows firewall:

Go to Start/Settings/Control Panel/Security Center
Then click on Windows Firewall and then the Exceptions tab
Normally there a line "File Sharing and printers", select it and press OK
If you do not see the line, click on Add Port and choose TCP port 445
Then go to Start/Settings/Control Panel/System and, in the Remote tab, check Allow users to connect remotely to this computer


Command line
Net use command
To obtain the necessary rights to run a shutdown command on the target machine, you must first run the net use command. Remember to note down the address of the target machine, it will be needed for the command.

Go to Start/Run or use the keyboard shortcut: Windows + R
Type cmd and hit OK
A DOS window (command prompt) will appear - enter the following command: net use \\ip_target_machine


Enter an administrator username/password for the target computer
Shutdown command
From now on we will implement the shutdown command.

The command is as follows:

shutdown -s -f -t 30 - m \\192.168.3.4

-s: Turns the computer off. (Required)
-f: Force running applications to close without warning.
-t xx: Set a countdown in seconds
-m \\xxx.xxx.xxx.xxx : the IP address of the target computer.



The GUI is available by typing: shutdown -i

For help on this command, type: shutdown /?
Software for this purpose can be found here: web
In our example, the target computer will receive instructions to shutdown in a 30 seconds delay

[breaths4u]

بھائی
آپ اپنا مسلہ تفصیل سے بتاؤ
جس کمپیوٹر کو آپ آف کرنا چاہتے ہو وہ آپ کے پاس نیٹ ورکنگ میں جڑا ہوا ہے ؟
یا
وہ سسٹم کہیں اور ہے تو آپ اُسے بند یا آن کرنا چاہتے ہو

[rashid832]

may wifi use kar raha ho aur jo hamaray elaqay may jo wifi use kar rahay hy in ki ip iak hi hy is k baray may batay plz