[Tutorial]Port Forwarding Via Evo Wingle

[MALIK R1ZWAN]

Hi Guys,
Today i am going to show you how to Forward Port of Evo Wingle. There will be some question in your mind after reading this thread. so i shall explain....

What is Port Forward?

Configure parameters to allow the operation of special applications, such as online games, video conferencing, or IP phone,over the LAN.

Why We Forward Port?
We use this function for connecting to a Online FTP or Hosting on your pc.
Configure a virtual server to enable external computers to access WWW, FTP or other services provided by the LAN.

Lets Start

How to Forward a Port Of Evo Wingle 9.3Mbps
1st: Goto To Your Evo Wingle Homepage. Or Enter your Lan Ip Address in Page
Lan Ip Adress : 192.168.1.0 etc

2nd:Click On Setting and You will see a page for username and password. And Enter your user and Password which .
username: admin
Password: admin

3rd:You will see a page then click On Security.

4th: In Security tab you will see a another Tab Named: Firewall Switch. Click On it. A page will see a page. there will be 3 options.
Enable Firewall
Enable Ip Address Filter
Disable Wan Port Ping.
Now you have to check box. Enable Firewall and Enable IP Address Filter.

5th: Click On Next Tab named: Lan Ip Filter and enter all information. i have shown all in pictures

6th: Click On Next Tab Named: Virtual Server.Enter Information.

[MALIK R1ZWAN]

7th: Click On Next Tab And enter Information.I have shown all in the Picture.

8th: On Next tab Named: DMZ Status. Check the Box Named: DMZ Status: Enable and then Apply.

9th: Click On Tab Named: UPnP Setting and Check the enable box and apply.

10th: Click On NAT Setting. And Check the box Cone. there are two box. Cone and Symmetric. and Apply

Here Our work's done.
Thanks
MALIK RIZWAN

[W.a.l.e.e.d]

7th: Click On Next Tab And enter Information.I have shown all in the Picture.

8th: On Next tab Named: DMZ Status. Check the Box Named: DMZ Status: Enable and then Apply.

9th: Click On Tab Named: UPnP Setting and Check the enable box and apply.

10th: Click On NAT Setting. And Check the box Cone. there are two box. Cone and Symmetric. and Apply

Here Our work's done.
Thanks
MALIK RIZWAN

Malik sahb good work

[MALIK R1ZWAN]

Malik sahb good work

پسند کرنے کا بہت بہت شکریہ

[Tanhai137]

Good job.... Very helpful l.

[MALIK R1ZWAN]

Good job.... Very helpful l.

پسند کرنے کا بہت بہت شکریہ

[chanleen]

Nice