I configured one 8pin and one 4pin switch on Starsat2000HD Hyper receiver, I connected 4LNBs on a 4pin Switch and connected the output of this switch to LNB1 of 8pin switch and configure it in setup as as LNB1 then Diseqc1.0 as LNB1 & Diseqc1.1 LNB1 then Diseqc1.0 as LNB2 & Diseqc1.1 LNB1
again Diseqc1.0 as LNB3 & Diseqc1.1 LNB1 Finaly Diseqc1.0 as LNB4 & Diseqc1.1 LNB1, and it working fine you can connect as many switchs as you can.
Below are attachments of my dish setup, 3 Satellites on 2ft Dish and 3 Satellites on 4 ft Dish.
Bookmarks