Experts i Need your Help...

**ateeb** · 13th March 2009, 02:12 AM

Asslam o Allaikum
Pyaray dosto aur Experts!

Umeed hai aap sab log theek thaak khush baash hongay...
Mujhay aik kam karnay kay liay ap logon ki help chahiay..
Agar koi madad kar sakay to bohat mashkoor hunga !
Bro i want to Prepare Computers withought Hard Disks..
Called Diskless Terminals !
thora bohat mujhay bhi pata hai ...
It need a Computer with Linux Installed
and an image of windows Xp.. (to be run as workstation os)
i need complete and simple procedure of doing this..
agar koi help kar sakay ya thori bohat bhi maloomat rakhta ho to share karay
yeh chez Network admins k liay bohat interesting aur mufeed hai
to aiay mil kar koshish karain ....
INSHALLAH jald hi ham kamyaab ho jaengay

aap logon kay qeemti waqt kay liay bohat shukria..

Allah Tala aap sab ka hami o nasir ho
(aameen)

**nom** · 13th March 2009, 08:41 PM

Diskless workstation are not something you would normally use in a home network as they would only be used in large installations where centralized administration is made simpler.

**nom** · 13th March 2009, 08:52 PM

Fast start! WTware configuration for network boot. Diskless terminals.

In this article is described the fastest way to boot diskless computer and connect to the Windows terminal server. How to perfect obtained solution you'll see later.

Please, follow the instructions in this article exactly as they are. If on some step you'll get not the same result as described it's better to stop and find an error. Possibly it's worth to contact WTware techsupport then. We advise not to make experiments and improve the scheme until you'll get working model.
Initial conditions:

* There is a server with Windows 2003 Server (or with Windows NT 4.0 Terminal Server + service pack 6, with Windows 2000 Server + Servicepack 4) and a launched terminal service. Please, make certain that the connection by standard Microsoft client to the terminal service works correctly.
* There is a terminal — a computer, that satisfies all the demands from hardware compatibility list.
* These two computers are connected by LAN.
* There is a launched and activated terminal services licensing server in the network. In some cases the terminal service rejects WTware terminals connections without this service. That is the service, that causes the terminal server to reject connections from any clients after 90 days.

There are many ways of computer network boot. The main point of all these ways is the same: during the boot some bootstrap loader should be executed on the terminal. It's a kind of a microprogram that completes BIOS's functionality with boot by network.

Now we'll use a loader on floppy. Later on you can use any other way, but for the first time it's the simplest one.

Network boot is performed in such way:

Instruction:

1. Download:

1. ebnet522.img, floppy image with the universal loader.
2. rawwritewin-0.7.zip, a program for writing the image to a floppy.
3. Last version of the tftpd32 utility from developer site.
4. WTware package for network boot.

2. Write by the rawwrite program ebnet522.img loader image to the floppy. Boot the terminal from this floppy (arrow 1 on the scheme). Firstly on the screen you'll see such lines:

Then the loader tries to detect the network card. If it's a success then the request to dhcp-server will be performed (arrow 2 on the scheme) and line "Searching for server (DHCP)..." will appear:

3. Make dhcp-server. Two services — dhcp and tftp — are required for network boot. At first it's easier to use tftpd32 utility to perform the functionality of these services. It has all the needed functionality, easy-to-setup and configure, keeps query log.

If in the network there's a dhcp-server, then configure it instead of making a new one. Two dhcp-servers can't work at once in one Ethernet network segment.

For Microsoft dhcp included into Windows distributive two parameters should be specified: 066 (Boot Server Host Name — tftp-server ip-address), and 067 (Bootfile Name — wtshell.nbi). Look at the next article.

For ISC dhcpd unix-server add these magic words in the configuration file dhcpd.conf:
next-server tftp-server-ip-address;
filename "wtshell.nbi";

Configure tftpd32 main window in this way:

Important fields:

* Server Interfaces: ip-address of the server network card that looks at the terminal.
* IP pool starting address: starting IP-address of free address pool in the network, where the terminal and the server are.
* Size of pool: the amout of this pool (specify at least 10).
* Boot File: type wtshell.nbi here.
* Mask: mask of the network, where the terminal and the server are.

**nom** · 13th March 2009, 08:54 PM

Then press "Settings" button and configure tftpd32 in this way:

4. Restart the terminal. After that on the tftpd32 utility tftp tab appears such text:

3. Make dhcp-server. Two services — dhcp and tftp — are required for network boot. At first it's easier to use tftpd32 utility to perform the functionality of these services. It has all the needed functionality, easy-to-setup and configure, keeps query log.

If in the network there's a dhcp-server, then configure it instead of making a new one. Two dhcp-servers can't work at once in one Ethernet network segment.

For Microsoft dhcp included into Windows distributive two parameters should be specified: 066 (Boot Server Host Name — tftp-server ip-address), and 067 (Bootfile Name — wtshell.nbi). Look at the next article.

For ISC dhcpd unix-server add these magic words in the configuration file dhcpd.conf:
next-server tftp-server-ip-address;
filename "wtshell.nbi";

Configure tftpd32 main window in this way:

Important fields:

* Server Interfaces: ip-address of the server network card that looks at the terminal.
* IP pool starting address: starting IP-address of free address pool in the network, where the terminal and the server are.
* Size of pool: the amout of this pool (specify at least 10).
* Boot File: type wtshell.nbi here.
* Mask: mask of the network, where the terminal and the server are.

Then press "Settings" button and configure tftpd32 in this way:

4. Restart the terminal. After that on the tftpd32 utility tftp tab appears such text:

And on the terminal screen such lines should be printed:

First two lines correspond to the arrow 3 on the scheme. The last one is a request for WTware to load (arrow 4 on the scheme).

Then the terminal will print "TFTP error 1 (File not found)". As now it should be so.

5. Configure tftp-server. Unpack the wtware.?-?-?.network.en.zip archive to the disc C: so that the full path to wtshell.nbi would be: c:\wtware.net\wtshell.nbi. In tftpd32 press Settings button, then Browse and choose folder c:\wtware.net. Then restart the terminal again. On the tftpd32 utility tftp tab these lines should appear after that:

And on the terminal screen appears:

Successfull network boot, arrow 5 on the scheme!

**nom** · 13th March 2009, 08:55 PM

6. Configure WTware parameters in the file default.wtc, WTware configuration file:

1. Be sure to delete symbol # in the line
# win2kIP = 10.100.50.2
and specify the terminal server ip-address instead of 10.100.50.2 .
2. If you use not PS/2 mouse, then necessarily set mouse parameter.
3. If wheel mouse used delete symbol # in the line
# mouse_wheel = on

Restart the terminal. Terminal screen should look like that:

7. Test video driver. Choose first menu item, "Video test". On the terminal screen should appear:

Colors should be in the same order as on the screenshot. While mouse moving the cursor with white WTware logo moves on the screen.

8. Test network. Run menu command "Network test". On the screen will appear:

Of course, should be your terminal server IP-address, the same as specified in the win2kIP parameter of the default.wtc configuration file. And you should see text "1 packet received, 0% packet loss".

9. Run. Run menu command "RUN!". On the screen should appear Windows login window.

As a result: computer boot with no harddisk, you can work with Windows terminal server. You've got a working stand. Now you can change the scheme to make it more convenient and functional

More Articles
Click Here