now change ur ip and trace an email

[l0v3r```````B0y]

What Is An IP Address?

IP Address (Internet Protocol Address): This number is an exclusive number all information technology devices (printers, routers, modems, et al) use which identifies and allows them the ability to communicate with each other on a computer network. There is a standard of communication which is called an Internet Protocol standard (IP). In laymans terms it is the same as your home address. In order for you to receive snail mail at home the sending party must have your correct mailing address (IP Address) in your town (network) or you do not receive bills, pizza coupons or your tax refund. Continue reading the IP Address Definition...
Change Your IP Address

There are MANY methods to change your IP address. Some methods will work for you but may not work for someone else and vice versa. If your IP is static, then you CAN’T change your IP address without contacting your ISP. If you have a long lease time on your IP then you won’t be able to change your IP without cloning your MAC address, which I’ll explain later in this article. Learn how to change your IP address.
How To Trace An Email

Each email you receive comes with headers. The headers contain information about the routing of the email and the originating IP of the email. Not all emails you receive can be traced back to the originating point and depending on how you send emails determines whether or not they can trace the email back to you. The headers don't contain any personal information. At most, you can get the originating IP and the computer name that sent the email. The originating IP can be looked up to determine from where the email was sent. Learn more about tracing emails in our how to trace an email article.

[l0v3r```````B0y]

How To Change Your IP Address




There are MANY methods to change your IP address. Some methods will work for you but may not work for someone else and vice versa.

If your IP is static, then you CAN’T change your IP address without contacting your ISP.

If you have a long lease time (explained in this article) on your IP then you won’t be able to change your IP without cloning your MAC address, which I’ll explain later in this article.

It definitely helps if you know how the IP is being assigned to you.

You can read our DHCP definition to get a better understanding.

What is an IP lease time? IP lease time is the amount of time your ISP determines you’ll be assigned a particular IP address. Some IP lease times are just a few days and other IP lease times could be set for a year or more. This setting is completely up to your ISP.

One of the easier methods to change your IP is to turn off your modem/router/computer overnight. Then turn it back on the following morning. This method WILL NOT work if your ISP has a long lease time set for your IP.

The following method will ONLY work if your computer is being assigned your external IP and not a router.

How to determine if your computer is being assigned the external IP

If your connection is direct to your computer and your computer gets the public IP and not a router, you can try this:
For Windows 2000, XP, and 2003
1. Click Start
2. Click Run
3. Type in cmd and hit ok
4. Type ipconfig /release and hit enter
5. Click Start, Control Panel, and open Network Connections
6. Find and Right click on the active Local Area Connection and choose Properties
7. Double-click on the Internet Protocol (TCP/IP)
8. Click on Use the following IP address
9. Enter a false IP like 123.123.123.123
10. Press Tab and the Subnet Mask section will populate with default numbers
11. Hit OK twice
12. Right click the active Local Area Connection again and choose Properties
13. Double-click on the Internet Protocol (TCP/IP)
14. Choose Obtain an IP address automatically
15. Hit OK twice
16. Go to What Is My IP to see if you have a new IP address

For Vista
1. Click Start
2. Click All Programs expand the Accessories menu
3. In the Accessories menu, Right Click Command Prompt and choose Run as administrator
4. Type ipconfig /release and hit enter
5. Click Start, Control Panel, and open Network and Sharing Center. Depending on your view, you may have to click Network and Internet before you see the Network and Sharing Center icon
6. From the Tasks menu on the left, choose Manage Network Connections
7. Find and Right click on the active Local Area Connection and choose Properties (If you’re hit with a UAC prompt, choose Continue)
8. Double-click on Internet Protocol Version 4 (TCP/IPv4)
9. Click on Use the following IP address
10. Enter a false IP like 123.123.123.123
11. Press Tab and the Subnet Mask section will populate with default numbers
12. Hit OK twice
13. Right click the active Local Area Connection again and choose Properties
14. Double-click on Internet Protocol Version 4 (TCP/IPv4)
15. Choose Obtain an IP address automatically
16. Hit OK twice
17. Go to What Is My IP to see if you have a new IP address

Some people have inquired about manually assigning their IP address. This IS possible, but you run a very high risk of your ISP banning you from connecting to the internet. To manually change your IP, follow the steps above for your Operating System. In step 9 or 10, depending on your O/S, enter an IP similar to the one displayed in the command prompt window. For example, if the IP displayed in the command prompt window is 75.1.2.3, change yours to 75.1.2.4. You’ll also need to manually enter the Subnet, Gateway and DNS Server IP addresses as well. If the new IP you give your computer doesn’t work, chances are someone else on the ISP network has already been assigned that IP. You’ll need to move on to the next one and keep trying until you find an open one. However, some ISPs match up your MAC or modem data to the IP that’s been assigned. If those 2 things don’t match up, you won’t be able to connect no matter what. If your router gets the IP and not your computer, you’ll need to http in to your routers interface and manually assign the IP there. It’s pretty much the same method as assigning the IP to your computer. The method that varies is in how you reach your routers interface. You can get the instructions from your manufacturer’s website.

MAC Cloning. What is a MAC address? A MAC address is a physical hardware address assigned to each device that has the capability of connecting to a network. The internet is nothing more than a large network. The MAC address is something that is assigned in the chip on the device and is not something the user can change. MAC cloning can only be done at your router providing it has those capabilities. Most ISPs assign their IPs based on the MAC address in your equipment. If the MAC address of your router is 00-11-22-33-44-55 and you connect to your ISP, the DHCP server records your MAC and assigns an IP. If you disconnect from the ISP, you lose your IP address. The next time you connect, the DHCP server sees your MAC, looks to see if it has assigned an IP address to you before. If it has and the lease time has not expired, it will most likely give you the same IP address you had before disconnecting. Why clone a MAC address? New MAC address most likely equals new IP. How to clone your MAC and if your router has this feature is dependent on the router itself. You’ll need to find the instructions on the manufacturer’s website. We offer a Quick Reference List on our Router Support page.

Please post any questions or comments in the Change My IP Address thread.

[l0v3r```````B0y]

IP Address Lookup Tools


IP Address Lookup

Our IP Address Lookup tool is designed to give you an idea of where your IP Address or the IP Address you lookup is located. This tool is not 100% due to many different factors. Some of those factors include where the owner of the IP has it registered, proxies, cellular IPs, etc. The results of this IP Address Lookup utility include Host Name, City, Region / State, Postal / Zip Code, Country Name, Country Code, Time Zone, Latitude, Longitude, ISP, Domain Name, Net Speed, and IP Decimal. If you have any questions about the IP Address Lookup tool or the results, please check out the IP Address Lookup Forum.
IP WHOIS Lookup

The IP WHOIS Lookup tool will provide you with the IP Address owners information. The IP Whois information contains data such as who allocates the IP (ie. ARIN, APNIC, RIPE, etc.), if the IP Address is allocated, IP Address contact information, and more. If you have any questions about the IP Address WHOIS Lookup tool or the results, please check out the IP Address WHOIS Lookup Forum.
Host Name Lookup

This Host Name Lookup tool does exactly what it says....it looks up the Host Name of the IP Address you enter.
User Agent Info

This page displays your User Agent, Screen Resolution, Processor Type, Port the request was made, and if security (https) is in use.
Server Headers Check

The Server Headers Check allows you to find server headers information. It will display information about the server headers such as the server type, status code, content-type, etc.

[Ahmedjan]

Thankx Bro Nice work

[Thinkme1st]

ye urdu FORUM heiyeha just urdu Me likh ker post keyn ager nehi Tu Roman urdu mei post ker dyn

And ap k section bi ghelt tha ye Tips and tricks me post kerna chahye tha

[Sheeda_Pastol]

Moved to GD.

[sub ka dost]

میرے خیال میں صرف اردو میں ھی پوسٹ کرنی چاہئے رومن میں بھی کیوں

[sub ka dost]

میرے خیال میں صرف اردو میں ھی پوسٹ کرنی چاہئے رومن میں بھی کیوں

[dome30]

kiya ye mamkin hai ki eik secured wireless connected hojawon?yani wap ya wep ya tkip/aes

[Muhammad_Asif]

Ye sub kia hay????
Kia esi English ke liay ye Forum banai gai hay..??
bhy, Urdu me Likha karein... English Humein bhi aati hai. aur bahot Khoob Ati hain. Lekin chonkay ye Forum Urdu ka hay. es liay Urdu me likhein

Ap ne es topic ko bus sidha es website se copy kar lia. aur thread bana kar humein pesh kar dia. Agar thread likhnay ka itna he shoq hay to kuch to es Urdu Translation likh li hoti.. Lekin aap se itni takleef ho to....
www.whatismyip.com

[*~Zaka~*]

Thankx Bro Nice work

[kashifazizawan]

acha hay...