DOWTEL FWT
Connect Dowtel FWT set with PC through RS-232 serial cable (DB-9 connector)
Go to START, SETTING, and CONTROL PANEL
In control panel menu, select “PHONE AND MODEM OPTION”
In location information window, select country “Pakistan” and put the area code
Select the Modem tab and click “Add”, check “DON'T DETECT MY MODEM, I WILL SELECT IT FROM LIST” and click “Next”
Choose “STANDARD 33600 bps MODEM” and click “Next”
Select the COM PORT where your FWT is connected to, and click “Next”;
You have installed modem on your desktop successfully, click “Finish” to go back to phone and Modem Options
Select STANDARD 33600 bps Modems and click “PROPERTIES”
Go to “MODEM TAB” and make sure that Maximum Port Speed is 115200 bps, which is the default setting of FWT
Go to “ADVANCE TAB”, enter “AT+CRM=150” at Extra initialization commands, and click “OK”
To verify modem installation select “Control Panel”, “Phone and Modem”, “Modem”, select “Standard 33600 bps” modem, and click “Properties, Diagnostics, Query modem” if system affirms successful installation of modem follow next steps, or else repeat all previous steps
Add Network Connection
Click START, PROGRAM, ACCESSORIES, COMMUNICATION, NETWORK CONNECTIONS
Click “Create a new network connection”
The system will pop up interface [New connection wizard], click “Next”
Select “Connect to the internet” and click “Next”
Select “Set up my connection manually” and click “Next”
Select “Connect using a dial-up modem” and click “Next”
System will pop-up [Connection name], enter name “V PTCL” and click “Next”
The system will pop-up [phone number to dial], enter #777 and click “Next”
Enter “User Name” and “Password” and click “Next”
a. User Name = vwireless@ptcl.com small letters
b. Password = ptcl
Click “Add a short cut to this connection to my desktop” and click “Finish”
In “Connect V PTCL” window double click “Properties” and check that installed modem is “standard 33600 bps modem”
Double click “configure” and check that the “Maximum Speed [bps]” is 115200 bps
Start Connection
1. Double click the short cut on desktop or go to START, CONNECT TO, and SHOW ALL CONNECTIONS, double click V PTCL
2. Once you get connected, status of your connection, V PTCL displays connection.
[CENTER][IMG]http://i39.tinypic.com/2vcz329.gif[/IMG][/CENTER]
Advance Member
lovtam said:
Posting Permissions
Reply With Quote
Bookmarks