iska kia matlab hay.?

**4you007** · 28th January 2010, 04:28 PM

Dosto ye error msg kab ata hay.?
Name: Image.jpg
Views: 296
Size: 37.0 KB

Or Es ka kia matlab hay.?
Diskket drive 1 seek failure

**ayaz baig** · 29th January 2010, 11:26 AM

yaar ye hamari bhi samaj mai nahi aa raha haiN

**naeemprince** · 29th January 2010, 06:22 PM

ap thori detail batao..ye error kab aata hai///...kiya koi software install kr rahe ho?

**FritZie** · 29th January 2010, 06:30 PM

Ye JanaB is Fault Kee Waja Se Hota Hai
Faulty or improperly inserted diskette, incorrect configuration settings in System Setup program, loose diskette/tape drive interface cable, or loose power cable.
Agar System Setup Ka Masla Hai To Aap Pc restart Karen
Or
F 2 Se Setup Me Jahen
Press the <Down Arrow> key until Diskette Drive A: is highlighted and press the <Enter> key.
Press the <Right Arrow> key once so that NOT INSTALLED is highlighted.
Press the <Esc> key once.
Press the <Down Arrow> key to highlight Integrated Devices, and press the <Enter> key.
Press the <Down Arrow> key to highlight Diskette Interface.
Press the <Right Arrow> key until OFF is highlighted.
Press the <Esc> key twice.
Press the <Enter> key to Save Changes & Exit.

**4you007** · 29th January 2010, 07:50 PM

Shookria Its working. . . .

**saher sajjad** · 29th January 2010, 11:19 PM

Fritzie said:

Ye JanaB is Fault Kee Waja Se Hota Hai
Faulty or improperly inserted diskette, incorrect configuration settings in System Setup program, loose diskette/tape drive interface cable, or loose power cable.
Agar System Setup Ka Masla Hai To Aap Pc restart Karen
Or
F 2 Se Setup Me Jahen
Press the <Down Arrow> key until Diskette Drive A: is highlighted and press the <Enter> key.
Press the <Right Arrow> key once so that NOT INSTALLED is highlighted.
Press the <Esc> key once.
Press the <Down Arrow> key to highlight Integrated Devices, and press the <Enter> key.
Press the <Down Arrow> key to highlight Diskette Interface.
Press the <Right Arrow> key until OFF is highlighted.
Press the <Esc> key twice.
Press the <Enter> key to Save Changes & Exit.

Well Done Fritziee