Combine Two Internet Connections

[Safeer abid]

::
Friends today i'll teach you that
How to Combine Two Internet Connections..
It is my 1st thread of sharing knowledge, before this i have use this forum to solve my problems..
Plz feedback me and remember me in your prayers.. Now go to thread:
You have more than one active internet connections and you are using only one at time, while the other is resting? Don't let it be lazy. Combine them all to get combined internet speed. Say you have two connections of 1 Mbps each, you just can make 1 1, 2. This can work regardless of the type of the connections, i.e. it may be wired, wireless of mobile communication.


Combining LANs (wired,wireless or DSL)
1-Turn everything on, i.e. your computer, modems (in case of DSL).
2-Connect them on the relative ports.
3-Dial, or do whatever you need to do to establish internet connection and test each one by one, separately.If all good proceed to the next step.
4-While each one is active and connected navigate to the "Network Devices" folder of your computer.It usually stays under control panel.
*.Windows 8 or Windows 8.1: Press Windows D to navigate to the desktop, and rest is same as windows 7 below.
*.For Windows 7 and Vista: Click the network icon on the task bar-> then click "Open Network and Sharing Center". Then click "Change Adapter settings".
*.For XP: Click Start > Control Panel.Then on the Control Panel window, double-click Network Connections.
5-Review the window showing all of your network connections.The active connections will be two blue desktops without a red cross sign.
6-Drag and select Active LAN (Wired, Wireless or DSL Modem) connections.
7-Right click on one of the selected-> click "Bridge Connections" .Then wait and a network bridge with different icon will appear. You might have to provide administrative right.
Enjoy double speed.


Combine All Other Types of Connection (i.e. bluetooth modem, mobile broadband, OTA modem, dial-up)
1-Power up everything and connect to the required ports.
2-Check each connections separately.
3-Follow the process above to navigate to your network device (adapter) folder.
4-Right click one network adaptor at a time (out of your active and working adapters (connections)).Change the Interface Id to the same number (say choose 10 for all). Repeat this for each connection.

[ghaffar_bhl]

i have two dsl connections. both are connected with each other for networking. i am just changing the gateway and can use anyone but in one time one. how can i use speed of both at one time. when i try to make bridge mesgs shows there should be two connections. but i connected with cable with one. suggest me.

[vtidgk]

Abey site hi urdu ki tu english write ki hai lagta tu ne is site rule ni read kiyee pheley tu rules ko study kr phir thread bna aur post ok
Don't mind bro.

[rana-sajjad]

bhai urdu main explain bhi kar dain k kia likha hai?

[Kings1u]

Nice work

[parvi650]

very nice sharing.........

[Amjid Amjid]

Blutooth se mobile par package k through window 8.1 pa net kaisy chlaya jae

[Amjid Amjid]

**********

[Inam__NiaZ]

Nice job keep it up

[sairajaan66]

[usmanprince7]