problem

[madeen]

when I start my computer when it reach to the well come page its restart again and again plz inform me how can solve this problem even though I have reinstalled window xp but all invain

[AliDaMalang]

معذرت کے ساتھہ میں اس کا جواب انگلش میں دون گا

I think you might have more than one partitions or hard drives. It appears that you might have VIRUS in other partitions or drives. You need to boot from CDROM with a bootable antivirus CD and check the drives/partitions before reinstalling windows.

Try Elimination Method, that is unplug everything from your computer like web cam, printer etc, just boot with keyboard and mouse. If this works then add additional things one by one.

If you don't have luck so far, then think as to what hardware you changed before you got this problem. For example RAM or new PCI card etc. If you did change something then remove that and boot again.

If no luck then you might have faulty motherboard,. It could be a faulty PCI slot or memory slot.

[Sinbad]

To resolve this issue, use the Windows Recovery Console to extract a new copy of the Kernel32.dll file from the original Windows XP CD. To do this, follow these steps:

1. Start the Recovery Console. If you do not have the Recovery Console installed, start it from the Windows XP CD. To do this, follow these steps:
a. Insert the Windows XP CD, and then restart the computer. If you are prompted, select any options that are required to start from the CD.
b. When the text-based part of the Setup program starts, follow the instructions that appear on your screen. To select the repair or recover option, press R.
c. If you have a dual-boot or multiple-boot computer, select the installation that you must access from the recovery console.
d. When you are prompted, type the Administrator password.
2. At the command prompt, type cd system32, and then press ENTER.
3. Type ren kernel32.dll kernel32.old, and then press ENTER.
4. Type map, and then press ENTER.
5. Note the drive letter that is assigned to the CD-ROM drive that contains the Windows XP CD. It is appears in a format that is similar to the following format:

Code:
D: \Device\CdRom0

6. Type the following command, and then press ENTER:

expand drive\i386\kernel32.dl_

Where drive is the drive letter of the CD-ROM drive that contains the Windows XP CD). For example, type:

Expand d:\i386\kernel32.dl_

Note Include the underscore character after the "L" in Kernel32.dl_.

You receive the following message:


Code:
Kernel32.dll
1 file(s) expanded.
7. Type exit. The computer restarts.
8. Remove the Windows XP CD, and then start the computer as you regularly do